Your present location:Home >> Products >> Screw Jack >> Machine Screw Jacks RN series >> Screw Jack RN-50T
        • * Model: RN-50T
        • * Screw Diam: 90 mm
        • * Screw Pitch: 14 mm
        • * Static Load: Max 50 tons
        • * Dynamic Load: Max 11 tons
        • * Speed Ratio: 1/7 1/14 1/28
        • * Lifting Speed: 75-1500 mm/min
        • * Input Power: 3.28-12.7 hp
        • * Max Input: 1500 rpm
        • * Screw Type: trapezoidal screw
        • * Stroke Range: Max 6000 mm
        • * Top End: top plate, clevis end, threaded end, plain end
        • * Power Source: Electric, Manual, Both

        model
        diam.
        static load (ton)
        gear ratio
        travel stroke/turn
        (mm)
        1800RPM 
        1500RPM   
        1200RPM    
        900RPM  
        600RPM   
        300RPM  
        pitch
        input (HP)
        work load (kg)
        lifting speed (mm/min)
        input (HP)
        work load (kg)
        lifting speed 
        input (HP)
        work load (kg)
        lifting speed 
        input (HP)
        work load (kg)
        lifting speed 
        input (HP)
        work load (kg)
        lifting speed 
        input (HP)
        work load (kg)
        lifting speed 
        RN-50T 90mm
        P=14
        50 1/7 2 12.7 2100 3600 12.3 2450 3000 12.1 2850 2400 11.5 4000 1800 11 5450 1200 7.83 7750 600
        1/14 1 7.72 2350 1800 7.66 2800 1500 1.47 3300 1200 7.23 4550 900 6.79 6200 600 4.79 8750 300
        1/28 0.5 5.46 3050 900 5.22 3500 750 5.24 4100 600 4.9 5850 450 4.66 7800 300 3.28 11000 150

        Installation & Spindle Screw Type

        Translating screw: A driven worm shaft acts on an internal worm gear, which in turn drives a lifting screw to extend or retract. As the lifting screw translates through cast iron housing, then worm gear and lifting screw rotate together. When the lifting screw is held to prevent rotation, the lifting screw will move linearly through the cast iron housing to move the load.
        Keyed screw: Some loads don’t prevent lifting screw rotation. These applications require a keyed screw jack. A key, fixed to the jack housing and inserted into a keyway milled into the lifting screw, forces the lifting screw to translate without rotating.
        Rotating screw: A lifting screw keyed to the worm gear as a single unit, forcing the lifting screw to rotate,but not translate. A traveling nut, attached to the load, is driven by the rotation of the lifting screw. This type jack is ideal for applications that can not accommodate a screw protective tube and save enough mounting space.

        1/7, fast speed, 1 turn 2 mm travel
        1/14, mid speed, 1 turn 1 mm travel
        1/28, low speed, 1 turn 0.5 mm travel
        About the relationship of gear ratio, load capacities, input power, input torque and input rpm, please return RN-50T model.

        300: 300 mm travel stroke

        Accessories:
        N: Standard Jack,No additional accessories
        P: Steel Cover
        R: Rubber Bellow
        Y: Hand Wheel
        Other accessories,please check below picture