Tel: 86-769-88771988 / 88773988 Fax: 86-769-85644652
Mobile: 86-13532664175    Email: nosen@screwjack.cc

Product Detail
  • * Model: RN-100T
  • * Screw Diam: 100 mm
  • * Screw Pitch: 16 mm
  • * Static Load: Max 100 tons
  • * Dynamic Load: Max 26 tons
  • * Speed Ratio: 1/8 1/16 1/32
  • * Lifting Speed: 75-1500 mm/min
  • * Input Power: 7.78 -21.8 hp
  • * Max Input: 1500 rpm
  • * Screw Type: trapezoidal screw
  • * Stroke Range: Max 6000 mm
  • * Top End: top plate, clevis end, threaded end, plain end
  • * Power Source: Electric, Manual, Both

model
diam.
static load (ton)
gear ratio
travel stroke/turn
(mm)
1800RPM 
1500RPM   
1200RPM    
900RPM  
600RPM   
300RPM  
pitch
input (HP)
work load (kg)
lifting speed (mm/min)
input (HP)
work load (kg)
lifting speed 
input (HP)
work load (kg)
lifting speed 
input (HP)
work load (kg)
lifting speed 
input (HP)
work load (kg)
lifting speed 
input (HP)
work load (kg)
lifting speed 
RN-100T 100mm
  P=16
100 1/8 2 21.8 3500 3600 21.5 4000 3000 21.2 5400 2400 20.2 7100 1800 19.9 9850 1200 13 12950 600
1/16 1 15.7 4300 1800 15.5 5400 1500 14.1 7200 1200 14.7 9450 900 12.9 11800 600 9.5 17350 300
1/32 0.5 11.6 5500 900 12.8 6800 750 9.86 10000 600 10.1 14300 450 9.41 15750 300 7.78 26050 150

Installation & Spindle Screw Type

Translating screw: A driven worm shaft acts on an internal worm gear, which in turn drives a lifting screw to extend or retract. As the lifting screw translates through cast iron housing, then worm gear and lifting screw rotate together. When the lifting screw is held to prevent rotation, the lifting screw will move linearly through the cast iron housing to move the load.
Keyed screw: Some loads don’t prevent lifting screw rotation. These applications require a keyed screw jack. A key, fixed to the jack housing and inserted into a keyway milled into the lifting screw, forces the lifting screw to translate without rotating.
Rotating screw: A lifting screw keyed to the worm gear as a single unit, forcing the lifting screw to rotate,but not translate. A traveling nut, attached to the load, is driven by the rotation of the lifting screw. This type jack is ideal for applications that can not accommodate a screw protective tube and save enough mounting space.

1/8, fast speed, 1 turn 2 mm travel
1/16, mid speed, 1 turn 1 mm travel
1/32, low speed, 1 turn 0.5 mm travel
About the relationship of gear ratio, load capacities, input power, input torque and input rpm, please return RN-100T model.

300: 300 mm travel stroke

Accessories:
N: Standard Jack,No additional accessories
P: Steel Cover
R: Rubber Bellow
Y: Hand Wheel
Other accessories,please check below picture

      Screw Jack   Bevel Gearbox  Screw Jack Systems  Industry Solutions                Copyright © Dongguan NOSEN M&E Technology Co.,Ltd      Site Map   粤ICP备10088235号

Top